Handbags & totes
Structured bags and totes shown in the supplied portfolio; validate the chosen construction against the design.
HappiGreens · Material catalogue
Mango
Plant Leather
A mango-biomass material for considered design, sampling and product development.
Material overview
From mango biomass to material.
Mango agricultural biomass meets a biopolymer system, textile backing and engineered surface finish. HappiGreens helps buyers evaluate constructions, source samples and coordinate development for the intended application.
- Material
- Mango agricultural biomass combined with a biopolymer system, textile backing and engineered surface finishing.
- Construction
- Supplier describes 50% mango pulp and 50% biopolymer with cotton textile backing and surface coatings. The ratio's basis and its relation to the total finished composite are pending confirmation.
- Surface
- Matte, gloss and satin finishes; smooth, grained, embossed, perforated, quilted and woven-effect references. Custom colour and print development is supplier-stated, subject to feasibility.
- Format
- Supplier-stated width 110–140 cm. Tested thickness range 0.8–3.5 mm; routine commercial sheet states 0.8–2.0 mm. Confirm the production construction and tolerances.
Colour & surface library
A spectrum of surfaces.
Original material-surface imagery from the supplied collection. Colours and grains are visual references, not fixed specifications; confirm with physical swatches.
Yellow
Red
Brown
Pink
Blue
Green
Black
Application pathways
Develop for the end use.
Wallets & small goods
Wallets, cardholders, watch straps, journals, covers and tech sleeves are shown as development references.
Belts & accessories
Belts, backpacks and luggage panels need grade-specific prototyping and wear assessment.
Footwear & apparel
Footwear uppers and apparel panels are development areas only. Dry cracking and severe wet cracking at 30,000 flex cycles require construction-specific validation before use.
Technical dossier
Supplier-provided CSIR-CLRI laboratory results.
Reported figures only, not certification. The complete signed report, sample identity and test conditions have not been supplied. Dry and wet flex observations are especially relevant for repeated-flex applications.
| Property | Method | Supplier-reported result |
|---|---|---|
| Thickness | ISO 2589 | 0.8–3.5 mm |
| Tensile strength | ISO 3376 | ≥14 N/mm² |
| Elongation at break | ISO 3376 | 195–213% |
| Tear strength | SATRA TM162 / ISO 3377-2* | 26.77–32.40 N |
| Rubbing fastness — dry | ISO 11640 / SATRA TM8 | Grey scale 4/5 after 512 rubs |
| Rubbing fastness — wet | ISO 11640 / SATRA TM8 | Grey scale 4/5 on material and felt after 256 rubs |
| Mass per unit area | SATRA TM28 | 1,180.47 g/m² |
| Flex endurance — dry | SATRA TM55 | Crack observed at 30,000 cycles |
| Flex endurance — wet | SATRA TM55 | Severe crack at 30,000 cycles |
| Heat resistance | ISO 17233* | Up to 80°C, conditions pending |
| Cold crack | ISO 4675 | Pass at −10°C |
| Abrasion resistance | Martindale ISO 12947* | >35,000 cycles, end point pending |
*Exact tear method, heat-test conditions and Martindale end point/rating require confirmation.
Sampling & production
Plan the next step.
- Evaluation
- Supplier pack shows 30 × 30 cm sample and evaluation kit; availability and lead time to be confirmed.
- Custom development
- Supplier-indicated approximately 4.6 m² / 50 sq ft for a custom colourway; confirm by construction.
- Commercial orders
- Supplier-indicated approximately 100 m² / 1,000 sq ft, with approximately 45 days production lead time; reconfirm per order.
Care & handling
Preserve the surface.
- Keep dry
- Avoid prolonged water contact and high humidity. Wipe moisture promptly with a soft cloth.
- Clean gently
- Use a soft, slightly damp cloth. Do not soak or use harsh chemicals.
- Dry naturally
- Air-dry away from heaters, hair dryers and direct sunlight.
- Store & handle
- Store flat in a clean, dry, ventilated place. Avoid oils, sharp objects, excessive stretching and sharp creasing.
Important material note
Evaluate before specifying.
These technical figures are transcribed from supplier-provided laboratory summaries, not from a complete signed report; sample identity and test conditions require confirmation. The 50/50 formulation is not a verified whole-material composition. No claim of plastic-free, fully bio-based, biodegradable, certified vegan, specific carbon or water savings, or service life is made here. Confirm the exact tear method, heat conditions, abrasion end point, construction and application-specific performance before specification. The supplied finished-product portfolio carries an NDA notice and its photographs are not reproduced here pending explicit publication permission.
Discuss a requirement
Vidya Vijayaraghavan
Founder & CEO, HappiGreens
Mob / WhatsApp: +91 96001 25445
connectwithvv@gmail.com
General enquiries: support@happigreensco.com
Enquiries answered within 48 hours.
Tell us your application, colour, finish and target quantity. We can coordinate samples and supporting information.